{
  "added_at": "2026-11-06",
  "additional_evidence_urls": [
    "https://github.com/vs-sr-dev/hyperscan-homebrew/blob/54dd7aa7cb7078501b38ab55a440b8612195d36f/audio/spu-mame-audio.md"
  ],
  "category": "firmware",
  "description_en": "hyperscan-homebrew documents Mattel HyperScan hardware behavior for homebrew and emulation work. Its notes cover SPG290 PPU registers, RFID reader signaling, controller I²C behavior, SPU audio and S+Core 7 compiler failures, drawing on MAME experiments and hardware captures where available.",
  "description_zh": "hyperscan-homebrew 为 Mattel HyperScan 的自制程序与模拟工作记录硬件行为，涵盖 SPG290 PPU 寄存器、RFID 读卡器信号、手柄 I²C、SPU 音频及 S+Core 7 编译器故障。资料依据 MAME 实验，并在可行时与实机抓取结果对照。",
  "entry_url": "https://awesomerea.org/resources/hyperscan-homebrew/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/hyperscan-homebrew/",
  "evidence_url": "https://github.com/vs-sr-dev/hyperscan-homebrew/blob/54dd7aa7cb7078501b38ab55a440b8612195d36f/README.md",
  "group": "learn",
  "id": "hyperscan-homebrew",
  "json_url": "https://awesomerea.org/resources/hyperscan-homebrew/record.json",
  "kind": "documentation",
  "markdown_url": "https://awesomerea.org/resources/hyperscan-homebrew/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/hyperscan-homebrew/index.md",
  "name": "hyperscan-homebrew",
  "name_zh": "hyperscan-homebrew Mattel HyperScan 硬件研究笔记",
  "record_type": "resource",
  "relationship": "learning",
  "requirement_facets": [
    "scope",
    "testing",
    "license"
  ],
  "requirements": [
    "The documented work concerns Mattel HyperScan and its Sunplus S+Core 7/SPG290 hardware.",
    "The notes use MAME as the working reference platform; hardware captures were available for some comparisons.",
    "MIT license."
  ],
  "requirements_zh": [
    "文档针对 Mattel HyperScan 及其 Sunplus S+Core 7/SPG290 硬件。",
    "研究以 MAME 为主要参考平台，部分结果使用实机抓取数据对照。",
    "MIT 许可证。"
  ],
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/vs-sr-dev/hyperscan-homebrew",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}