{
  "added_at": "2026-11-01",
  "additional_evidence_urls": [
    "https://github.com/Vittuu/icsee-localmod/blob/52f0ca06064faa2e62ee6d9c600f048bd1768207/docs/REA-GHIDRA-WORKFLOW.md",
    "https://github.com/morluto/rea/discussions/8070"
  ],
  "category": "community-case-studies",
  "description_en": "An owner-authorized XM530V200 camera case uses REA/Ghidra to investigate native Sofia command handlers, then adds local control and Home Assistant integration while preserving stock drivers and recording. The source-only extension documents separate static, emulated-protocol and physical-device evidence.",
  "description_zh": "XM530V200 摄像头所有者授权案例以 REA/Ghidra 调查原生 Sofia 命令处理器，再添加本地控制及 Home Assistant 集成，保留原厂驱动和录像；源码扩展明确区分静态、模拟协议及实机证据。",
  "entry_url": "https://awesomerea.org/resources/icsee-localmod-rea-camera-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/icsee-localmod-rea-camera-case/",
  "evidence_url": "https://github.com/Vittuu/icsee-localmod/blob/52f0ca06064faa2e62ee6d9c600f048bd1768207/README.md",
  "group": "rea",
  "id": "icsee-localmod-rea-camera-case",
  "json_url": "https://awesomerea.org/resources/icsee-localmod-rea-camera-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/icsee-localmod-rea-camera-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/icsee-localmod-rea-camera-case/index.md",
  "name": "iCSee LocalMod: a stock-firmware camera control extension",
  "name_zh": "iCSee LocalMod：保留原厂固件的摄像头控制扩展",
  "record_type": "resource",
  "relationship": "community-reported-mixed-workflow",
  "requirement_facets": [
    "prerequisites",
    "attribution",
    "testing",
    "limits"
  ],
  "requirements": [
    "Tested only on one XM530V200 / IPG-X2-WQ-BL unit. There is no universal image or public flash installer; source builds need a compatible ARM toolchain and matching Dropbear crypto library.",
    "The documented investigation used REA 6.8.0 and Ghidra 12.1.4. Binary addresses are specific to the analyzed Sofia build; the project is stock firmware with additions, not OpenIPC or a full DVRIP implementation.",
    "The owner reports physical PTZ/LED/audio and restart/SD-recording checks. QEMU tests use fake backends.",
    "The local bridge uses the existing device account over plain HTTP; the route-removal guard is not a firewall. Original additions are MIT, while stock firmware/drivers and third-party components retain their own rights."
  ],
  "requirements_zh": [
    "仅在一台 XM530V200 / IPG-X2-WQ-BL 设备上验证；没有通用镜像或公开刷写安装器，源码构建需兼容 ARM 工具链及匹配的 Dropbear 加密库。",
    "文档调查使用 REA 6.8.0 和 Ghidra 12.1.4；二进制地址仅适用于所分析的 Sofia 构建，这是原厂固件加扩展，并非 OpenIPC 或完整 DVRIP 实现。",
    "所有者报告了 PTZ/LED/音频及重启/SD 录像实机检查；QEMU 测试使用假后端。",
    "本地桥接使用现有设备账户和明文 HTTP，删路由保护不等于防火墙；原创扩展采用 MIT，原厂固件/驱动及第三方组件保留各自权利。"
  ],
  "targets": [
    "binary",
    "firmware",
    "protocol"
  ],
  "url": "https://github.com/Vittuu/icsee-localmod",
  "verification": "source-reviewed",
  "verified_at": "2026-11-01"
}