{
  "added_at": "2026-11-06",
  "additional_evidence_urls": [
    "https://github.com/fmontes/linkcam/blob/f4c3d8726e58d72bc8fb59e20fd19ec74c95fb3a/README.md"
  ],
  "category": "reconstruction-cases",
  "description_en": "LinkCam implements macOS menu-bar and command-line controls for the Insta360 Link 2 webcam. It uses standard UVC controls for pan, tilt and zoom, while its extension-unit investigation identifies a feature-mask bit and selector for AI tracking.",
  "description_zh": "LinkCam 为 Insta360 Link 2 摄像头提供 macOS 菜单栏应用和命令行控制。云台转向及变焦使用标准 UVC 控件；其扩展单元研究确定了 AI 追踪对应的功能位和选择器。",
  "entry_url": "https://awesomerea.org/resources/linkcam-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/linkcam-case/",
  "evidence_url": "https://github.com/fmontes/linkcam/blob/f4c3d8726e58d72bc8fb59e20fd19ec74c95fb3a/CONTRIBUTING.md",
  "group": "cases",
  "id": "linkcam-case",
  "json_url": "https://awesomerea.org/resources/linkcam-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/linkcam-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/linkcam-case/index.md",
  "name": "LinkCam: controlling Insta360 Link 2 through UVC extension research",
  "name_zh": "LinkCam：研究 UVC 扩展控制并驱动 Insta360 Link 2",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "prerequisites",
    "license"
  ],
  "requirements": [
    "macOS and an Insta360 Link 2 webcam.",
    "macOS Command Line Tools to build from source.",
    "MIT license."
  ],
  "requirements_zh": [
    "需要 macOS 和 Insta360 Link 2 摄像头。",
    "从源码构建需要 macOS Command Line Tools。",
    "采用 MIT 许可证。"
  ],
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/fmontes/linkcam",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}